Safe At Home With Smoke Alarms

(January 12, 2018 )

Smoke alarms are an important defense against injury or death in house fires. Statistics from the National Fire Protection Association show that nearly two-thirds of home fire fatalities occur in homes with non-working or missing smoke detectors. Most building codes now require smoke detectors in all residential structures, which has resulted in a steep drop in fire- and smoke-related deaths. Homeowners should check with their local public safety office or fire department for specific information on these requirements.

  • As in real estate, location is key! Smoke alarms should be in installed every bedroom, outside every sleeping area, and on each level of the home.

  • Alarms should be placed high on a wall or on the ceiling. To function as designed, smoke alarms must be installed in accordance with the manufacturer’s instructions for placement. High, peaked ceilings have dead air space at the top; in these cases, smoke alarms must be placed between 4 inches and no more than 3 feet away from the peak.

  • For areas close to the kitchen, use a detector with a “hush button” that can be used to silence nuisance alarms triggered by cooking smoke or steam. Alternatively, consider installing a photoelectric alarm near the kitchen, which will not be triggered by cooking. No matter which type is used, never remove the unit’s battery to stop or prevent nuisance alarms.

  • There are two primary types of smoke alarm technology: ionization and photoelectric. According to the National Fire Protection Association, ionization alarms are more responsive to flames, while photoelectric alarms are more sensitive to smoldering fires. For the most comprehensive protection, both types or a combination unit should be installed.

  • Test each alarm monthly. It’s helpful to put a reminder in the calendar to do this on the first or last day of the month, for example. The units have a test button that will sound the alarm for a moment or two when pressed. Any alarm that fails to sound should have the battery replaced. If the test button fails with a new battery, replace the entire detector immediately. Monthly testing is also an ideal time to dust off the unit so that it continues to work properly.

  • Replace the batteries at least once a year. A common rule of thumb is to do this when changing to or from Daylight Saving Time in fall or spring. Remember, a non-working alarm is no better than no alarm at all. Some alarms now come with 10-year lithium batteries that eliminate the need for new batteries, but the unit itself must be replaced after its stated lifespan.

  • If the alarms are hard-wired to the home’s electrical system, make sure they are interconnected for maximum effectiveness – meaning that if one alarm is triggered, all of the others will sound as well. Any hard-wired alarms, interconnected or not, should be installed by a licensed electrician for safety and proper operation.

  • The newest type of interconnected alarms are wireless. This technology allows detectors to communicate with one another and, like their hard-wired cousins, will sound all of the units at the same time even if just one is triggered initially.

THE PILLAR TO POST DIFFERENCE
  • The Pillar To Post Inspection Report is generated on site at the completion of the inspection, so your client won't have to wait for the results.

  • All Pillar To Post inspectors carry E&O insurance to protect you, the referring agent.

  • Three different Home Inspection Packages to choose from that allow your client to select the range of services they prefer - click here to learn more.

  • As North America's leading home inspection company, Pillar To Post is committed to providing the highest quality service to real estate professionals and their clients.
Bjorn Rygg
Accredited Home Inspector
Professional Home Inspections in
Langley, White Rock and South Surrey
We know our stuff!
 
 
Ph:   604-532-0530
Fax: 604-532-0570